Export STL for casting
Design the piece, check it will cast, then export an STL or 3MF. The file your caster gets is the same geometry as the weight and the stone list.
1. Finish the design
Work in the editor, or have an assistant draft the piece and then edit it yourself. A ring, pendant, earring or necklace is a DiaScript file, so a size, a stone or a wall thickness can still change. If you are bringing a model in, import it first. See the formats below.
2. Check it before it leaves
- Wall thickness. Diatech Make finds the thinnest wall and shows where it is. Set a minimum and it warns you before you export a shell that will not cast.
- Stone fit. Placed stones are measured against the finished metal and against each other.
- Real size. A mesh that was never given a physical size is flagged, so a scan does not go out at the wrong scale.
- Separate pieces. The report says how many metal bodies will cast on their own. A ring is usually one. A clasp and its tongue may be more.
- Your own rules. A check such as "the band is at least 1.5 mm thick" refuses to build when it fails.
Hollow a heavy solid to a wall you choose, closed or open at the back, when the weight is the problem. Weight is reported for yellow, white and rose gold, platinum, palladium, silver and more.
3. Choose the file
| Format | Use it for |
|---|---|
| STL | Casting, and resin and wax printers |
| 3MF | 3D printing, with units stored in the file |
| GLB | Web pages, AR and a viewer |
| OBJ | A sculpt you want to keep editing elsewhere |
Casting and printing leave as STL or 3MF. Export the whole piece or one part. Mesh exports come in draft, standard and high quality. A ring can also export a size run, one file per finger size. More on the checks and the tech sheet is in 3D printing and casting.
What you can import
STEP, STL, GLB, Rhino .3dm and JewelCAD .jcd open into the design. STEP
comes in as an exact solid. A .3dm or .jcd is rebuilt as features you
can still edit, which is covered in switching from JewelCAD or Rhino. SVG
and images come in for artwork and relief.
STEP is an import. The file you send to a caster is STL or 3MF.
The paperwork that matches
The tech sheet lists metal weight, stones with sizes and carats, a gem map and dimensioned views. It is generated from the geometry you export, so the sheet and the STL describe one model.
Export a file
Diatech Make is free to try. Open the editor, pick a template and export an STL. Read what DiaScript is if you want the file behind the model.