Earring design software for studs, hoops and drops
Design studs, hinged hoops and drops in the browser, findings included. Set the stones on their real girdle, mirror a pair, and export STL for casting.
The finding is part of the design
Earring hardware is a finding you place on the piece, not a separate drawing:
- A post, plain or notched, with a butterfly back.
- A lever-back on its hinge.
- A hinged hoop, including a clicker that closes flush.
- An omega clip, the loop around the post.
Posts and hinges are sized in millimeters, with a clearance you can read. Parts that cast separately stay separate in the model, so the pin and the lever do not fuse into one lump.
Studs and drops
A stud is a stone, a setting and a post. Pick the cut, then a head, bezel, halo or a flush seat that sinks the stone by its girdle. A drop adds a connector, a second stone or a pavé body under the stud. Halos follow the center stone's outline, including fancy cuts.
Paint melee onto a drop, a dome or a sculpt with the same pavé brush used on a band. Shared prongs, beads and micro-pavé are built around the stones you can actually buy.
A pair, from one side
Model one earring and mirror it. Metal and stones mirror together, and the mirrored stones still count in the stone list. Change the stone diameter on the original and the pair follows.
Hoops
A hinged hoop is a tube, a gate and a post. Set the diameter, the wire and how far the gate opens. Stones can sit in a shared-prong row, a channel or a pavé field along the hoop. The same sweeps and settings are what ring design uses, turned to an earring.
Weight, fit, then STL
The report gives metal weight for the alloy, the stone list with carats, and the thinnest wall. A fit check measures stones against the metal and against each other. Export STL or 3MF for casting and wax printing. The steps are on export STL for casting.
Design a pair
Diatech Make is free to try. Open the editor and start a stud or a hoop. See also pendants, necklaces and the feature list.